RCA F-35760 Owner's Manual page 45

L
J
Normit| [lst Only the cha_nels_included in the Normal list
are available when you scan up and down using the CHAN
buttons. Use the up and down arrows to indicate Whether
the channel number indicated is included (YES) or is not
included (NO) in the Normal channel list.
Parent Approved Use the up and down arrows to choose : .....
whether the channel indicated should be shown when the
Parental Control feature is turned on. Select YES to
indicate that the channel can be shown at any time,
regardless of whether Parental Control isturned on. Select
NO to indicate that the front panel cannot tune to that
channel when Parental Control is turned on. Important:
You must turn on the Parental Control feature ON in the
Parental Control control panel (see above).
Auto Channel Search Displays a control panel that lets you
tell the TV to search automatically for all the channels
available through the antenna input(s). When the TV finds an
active channel, it places it in the channel list; inactive
channels (weak stations or channels with no signal at all) will
be removed from the channel list.
./
. •.
- • -
Auto Tuning
automatically tune to the correct input channel when you
press VCR1, VCR2eLD, or DSSoCABLE.
Set VCR 1 Channel Displays a choice list that lets you
select the channel that the TV tunes to when you press
the VCR1 button. The choices are:
Displays a choice list that lets you set up TV to
Not Connected Choose this if you do not have a VCR
connected to an antenna or Video input on the back of
the TV, or if you don't want the TV to tune to a channel
when the VCR1 button is pressed.
Channel 3 Antenna A Choose this if your VCR is
connected to the Antenna A jack on the back of the TV,
and you want the TV to tune to channel 3 when you press
the VCR1 button. Reminder: Make sure the VCR's Ch 3/4
switch is set to channel 3.
Channel 4 Antenna A Choosethis if your VCR is
connected to the Antenna A jack on the back of the TV,
and you want the TV to tune to channel 4 when you press
the VCR1 button. Reminder: Make sure the VCR's Ch 3/4
switch is set to channel 4.
i
i
r Auto Tuning is part of the 1
| interactive setup routine. For
L more, see Interactive Setup, p. 15.
43