Remote Buttons - RCA P56925 User Manual

REMOTE BUTTONS
POWER When in "IV mode, turns TV on and off. If in another device
mode (VCR, DVD, Satellite, etc.) and programmed, will turn the device
on.
VCR1 Puts the remote in VCR mode and if autotuning is enabled, it will
turn on the TV and tune to the correct channel.
SAT.CABLE Puts the remote in SAT-CABLE mode and if autotuning is
enabled, it will turn on the TV and tune to the correct channel.
TV Turns on the TV and puts the remote in TV mode. Also displays
channel information.
DVD.VCR2 Puts the remote in DVDoVCR2 mode and if autotuning is
enabled, it will turn on the TV and tune to the correct channel.
AUDIO Puts the remote in AUDIO mode.
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed,
provides transport control for some remote-controllable VCRs, DVD
players, laserdisc players, tape decks, and CD players.
INFO Brings up channel information.
SKIP Press once before changing channels and the TV will wait 30
seconds before returning you to the original channel. Press repeatedly
to add more time.
CH ^ or CH v Scans up or down through the current channel list. Press
once to change the channel up or down; press and hold to continue
changing channels.
VOL - or VOL ÷ Decreases or increases the TV's volume.
MUTE Reduces the TV's volume to its minimum level. Press again to
restore the volume.
GO BACK Returns you to the previous channel.
(0-9) Number Buttons Enters channel numbers and time settings
directly though the remote control. To enter a two-digit channel, press
the two digits. To enter a three-digit channel, press and hold the first
digit until #-o appears, then add the second two. Example: to tune to
channel 123, press and hold 1 until 1- appears, then press 2, and 3.
FAV*INPUrlr In TV mode, press to toggle through the available input
sources (VID1/SVID1, VID2/SVID2, previous channel). In SAT mode, press
to select available channel lists.
ANTENNA Functions as TV/VCR button in VCR mode and TV/receiver
button in SAT-CABLE mode.
CLEAR Removes any menu or display from the screen and returns you
to TV viewing. Will also exit the Guide system.
MENUeSELIECl" Brings up the Main menu and selects highlighted items.
When in VCR mode, it functions as a PROGRAM button.
_O_/r_ VCR1 SAT'_BLE TV
O0
REVERSE PLAY FORWARD
RECORD STOP PAUSE
r-i-I r -I
INFO CH* SKIP
0 @xJ ,O)
CH-
MUTE GO BACK
40
FAV'INPUT ANTENNA
0 o0 0
CLEAR RESET
PiP ._ FETCH
SOUND
0
2O