Table of Contents
Advertisement
Playback procedure
Press DVD to select DVD
mode. Press OPEN/
CLOSE on the TV/VCR/
DVD orthe remote
control.
The disc tray will open.
n
........................................................................................
Place a disc onto the tray.
Position
it with the printed
label side up, align
it with
the guides,
and place
it in
its proper position.
NOTES:
• If a non-compatible
disc is loaded. "Incor-
rect Disc", 'Region Code Error" or "Paren-
tal Error" will appear on the TV screen ac-
cording to the type of loaded disc. If these
appear, check your disc again (see pages
44 and 60).
• Some discs may take a minute or so to
start playback.
• A "Prohibition"
symbol _
may appear at
the upper left of the screen. This symbol
means either the feature you tried is not
available on the disc. or the TVNCR/DVD
can not access the feature at this time. This
does not indicate a problem with the TV/
VCR/DVD.
• When you set a single-faced
disc label
downwards
(i.e. the wrong way up) and
press PLAY or OPEN/CLOSE
on the TV/
VCR/DVD,
"Reading"
will appear
on the
display for about 30 seconds and then 'No
Disc" or "Incorrect Disc" will be displayed.
• Some playback
operations of DVDs may
be intentionally
fixed by software
produc-
ers. Since this TV/VCR/DVD
plays DVDs
according
to the disc content
recorded,
some playback features may not be avail-
able. Also refer to the instructions
supplied
with the DVDs.
46
3
4
5
Press OPEN/CLOSE
or
PLAY.
The disc tray closes auto-
matically.
On
the
TV-screen,
.L
changes
to "Reading"
and
then playback commences.
, A menu screen
will ap-
pear on the TV screen,
if
the disc has a menu fea-
ture.
In this case,
press
A,
V,
•,
•
orENTER
to operate
a menu
fea-
ture.
Press STOP to end playback.
, TheTV/VCR/DVD memorizes the stopped point, depend-
ing on the disc."lJ" appears on the screen. Press PLAY
to resume playback (from the scene point).
If you press STOP again or unload the disc C m" ap-
pears on the screen.), the TV/VCR/DVD will clear the
stopped point.
Press OPEN/CLOSE.
The disc tray opens.
Remove
the disc and press POWER.
The disc tray closes automatically
and TV/VCR/DVD
turns
off.
Advertisement
Table of Contents
