INFO
Shows theTV's status displays
on theTV screen.
MUTE
Reduces volume to minimum
level.
Numbers
(O through
9) Select a channel up to 99 by pressing
two numbers.
Select a cable channel over 99 by pressing and
holding
1 until 1 --
appears on the screen.Then
press the other
two numbers.
POWER Turns theTV on and off.
SLOW + and -
Used with someTV
menus to select and adjust
features.
VOL Up and Down
Raises and lowers sound of TV.
Playing
a Tape
.
.
Tune theTV to yourVCR
viewing
channel
(3, 4, orTV's video input).
Insert a tape in the VCR.
If the Auto Play feature is set to ON, the tape automatically
begins playback (if the safety tab on the cassette is
removed).
•
Press FWD or REV to position the tape.
•
Press PLAY (if necessary) to begin tape play.
•
Press PAUSE for stop action.
•
PressTRACKING
up or down to remove any streaks from the
picture, if necessary.
•
Press STOP to stop playback.
Pause
If you pause, the VCR automatically
switches from pause to stop after a
few minutes to reduce tape wear.
AutomaticTracking
The VCR has automatic tracking
which adjusts the picture when
playing back a tape recorded on
another VCR. Automatic tracking is
turned on whenever a tape is
inserted or theVCR's power is
turned on.
2O