Table of Contents
Advertisement
Things
to Consider
Before You Connect
Protect Against
Power Surges
*
Connect
all components
bef[_re you plug any of" their power cords into the wall outlet or power strip.
NEVER plug your TV into an outlet that is controlled
by a wall switch.
*
Turn off the TV and/or device(s) before you connect or disconnect
any cables.
"
Make sure all antennas and cables are properly grounded.
Refer to the Important
Safe V Instructions
sheet packed with your TV.
Protect Components
from Overheating
*
Don't block ventilation
holes on any of the components.
Arrange the components
so that air can
circulate fred>
*
Don't stack components.
*
If you place components
in a stand, make sure you allow adequate ventilation.
*
Ifyou connect an audio receiver or amplifier, place it on the top shelf so the heated air from it won't flow
around other components.
Position
Cables Properly
to Avoid Audio
Interference
Insert each cable firmly into the designated
jack.
Use Indirect
Light
Don't place the TV where sunlight or room lighting will be directed toward the screen. Use soft or indirect
lighting.
Fee Statement
This digital television is capable of receiving analog basic, digital basic and digital premium
cable television
programming
by direct connection
to a cable system providing
such programming.
A security card provided
by your cable operator is required to view encrypted
digital programming.
Certain advanced
and interactive
digital cable services such as video-on-demand,
a cable operator's
enhanced
program
guide and data-enhanced
television services may require the use of a set-top box. For more information,
call your local cable operator.
8
Chapter
_
Advertisement
Table of Contents
