Table of Contents
Advertisement
(}choral
VCR Problems
No power
o
Make sure the DVD/VCR is plugged into a working outlet.
o
Make sure connections
between devices are correct and snug.
There's poor quaJity or no picture for normal TV viewing
o
If using RF coaxial cables to eonneet the DVD/VCR to the TV, make sure the VCR indfcator
[s not
displayed on the DVD/VCR's front panel (press the remote control's TV/VCR button to toggle
between VCR and W-viewing
modes].
If using A/V jacks and cables to connect the DVD/VCR to the TV, press the remote control's INPUT
button
when in TV mode to access the TV's Video Input Channel.
o
Tune the TVto an active channel.
o
Aii cables should be securely inserted and connected
to the proper jacks.
The buttons on the front of the unit won't work [and SAFE flashes]
o
The buttons are locked, Pressthe LOCKbutton on the remote to unlock them,
Cannot
sdeet
channels
over 69
o
Cable channels ovel 69 can only be selected if TNNINGBAND: is set to CAWin the TUNINGmenu,
Go to page 11 for instructions,
The timer
indicator
flashes
on the OVONCR
front
panel
o
The clock is not set, Go to page 11 for instructions,
o
Make sure there is a tape in the DVD/VCRwhen a timer recording is set,
Rewind does not operate
o
Make sure the tape isn't already rewound.
o
Make sure the tape isn't damaged or broken.
The incorrect time or date is shown
o
A power interruption
may have occurred and Automatic
Clock Set was not tinned
on ol did not
work properly. Cheek the time zone and Daylight-Saving
settings in the TIME menu.
o
Make sure the DVD/VCR player or cable box is tuned to the time data channel (check with youl
cable selv[ce provider for information
about time data).
o
Auto Clock Set [s not suppolted
in all areas ol by digital satellite receivers. Set the time and date
manually using the TIME menu. Go to page 11 for instructions.
The time did not adjust for Daylight-Saving Time
o
Make sure the Daylight-Saving
Time feature is set correctly
[n the TIME menu.
Chapter 6
47
Advertisement
Table of Contents
