Setup And Connections - RCA MR27300 User Manual

SETUP AND CONNECTIONS
Step 1:
Unpack the TV and remote control.
Caution: If you choose to use a stand with i
your TV, take precautions that the stand
or other furniture the TV is placed on is
properly located and of adequate size and
strength to prevent the TV from
accidentally being pushed off, pulled off,
or tipped over. This could cause damage
to the TV and/or personal injury.
Step 2:
Connect your TV. Connect the cable from your cable system or off-air
antenna to the cable in-jack on the back of the TV, as shown.
ANTENNA, CABLE, CABLE BOX OR VCR
Step 3:
Plug in the TV. Plug the end of the power cord into the wall outlet,
matching the wide blade of the plug with the wide slot in the outlet. Be
sure to insert the plug completely.
Step 4:
Put batteries in the remote.
1, Remove the battery compartment cover from the back of the remote,
2. Insert batteries as shown, matching the + and - ends of each battery
in the compartment.
3. Replace the cover.
Step 5:
Turn on the TV.
Press the POWER button on the remote or front panel.
Read the next section, The Menu System, which is a brief overview of the
basic rules for getting around in the menus using the remote or the TV's
front control panel.
Step 6:
Auto Channel Search.
Perform an Auto Channel Search (described in the Channel menu section).
2