Step 1: Unpack The Tv; Step 2:;Connecting Your Tv; Only - RCA P52935 User Manual

STEP 1: UNPACK THE TV
.Make sure to locate the remote control and your GUIDE Plus+ Bo?klet,
STEP 2: CONNECTING YOUR TV
-: There arethree types of connectionsoutlinedin this section:
i • .. •
TV Only: . If you're only going tO connect the
TV to your home antenna or cable •
system.
The Basic Connection:
If you're going to connect the TV to a
VCR or satellite receiver.
Advanced Connections:
If you're going to make multiple
Connections, h ooking up the TV to
one or two VCRs,DVD player, and a
satellite receiver.
Cable information and illustrations are given for each type of connection.
Once you, have completed your desired connectionYou may skip forward
to Step 3.
TV ONLY
This is a basic Connection from an antenna or Cable system,to your TV:
Connect the cable into the Cable/Antenna jack as shown.
Cables •
You will use the following cable to make your connection:
Coaxial Cable: These cables (:arry audio and v!deo
signal to the TV from an antenna, cable, or "
.. • . , ' .
_ . .. : cab!ebox. ,
CABLE, C ABLEBOX/OR ANTENNA "
!mportant Stand Information
Direct View TVs: 13,. - 36_ diagonal
CAUTION: Choose the location for your TV
carefully. Take precautions that the stand
or other fumiture the TV is placed on is
properly located (see Important
Safeguards sheet) and of adequate size
and strength to prevent the TV._rom
accidentally being Upped over, pushed off.
orpulled off. This could cause damageto
the,TV and/or personal injury.
(
f_
Before You Connect
_q
Protect against power surges:
• Connect all components before
plugging any power cords into the wall
outlet.
• TUrn off the TV and/or component
before connecting or disconnecting any
cables.
• Make sure all antennas and cables are
properly rgrounded. Refer to your
Safety Tips sheet packed with your TV.
%
•May Differ _,
S-Video jack forINPUT2 nor e._ernal i'! : "