Time Menu - RCA P52935 User Manual

The _choices for each screen are: -
Not Connected Choose this if you do not have a component
connected to an antenna or video input0n the back of the TV, or if
you don't wantthe TV to tune to a channel when the particular,
component button is pressed.
- i
ChannelL2 (SATICabla only) Choose this if your component is
connected to the antenna jack on the back of the TV, and _;ou'want
the TV to tune to channel 2 when you pressthe_specified
component button, Reminder: Make sure the components Ch 2/3/4
switch is setto channel 2.
i - .o
Channel 3 Choose this if your component is connected to the
antenna jack on the back of the TV, and you want the TV tO tune to
channel 3 when you pressthe specified component button.
Reminder: Mike sure the components Ch 3/4 switch is set to
channel 3.
Channel 4 Choose this if your component is connected to the
antenna jack on the back of the TV, and you want the TV to tune to
channel 4 when you press the specified component button.,
Reminder: Make sure the components Ch 3/4 switch is set to
channel 4.
Video I Input Choose this if your component is connected to the
INPUT1 jacks on the back of the TV and you want the TV to tune to
VIDI(SVID1 if you used an S-Video cable) input channel when you
press the specified component button.
Video 2 Input Choose this if your component is connected to the
INPUT2 jacks on the back of the TV and you'want the TV to tune to
VlD2 (SVID2 if you used an S-Video Cable) input channel when you
press the specified component button.
TIME MENU
Sleep Timer Displays a control panel that lets you select the amount
•of time you want to give the TV before it shuts itself off.
Schedule Displays a control panel that lets you set up a schedule for
turn!ng the TV on and off automatically. Make sure to turn the
schedule On. The on-screen directions guide you through the steps
needed to set the schedule.
Set Time Displays a control panel that lets you enter the current time.
The on-screendirections guide you through the stepsneeded to set the
time. If your TV Guide Plus+ system is setup, and running then itwill
automatically update your time and this option will not be available-
• View Warranty Clock Displays the number of hours the.TV has been in
Operation (up to 5 years)and the date
the
TV was first turned on.
• 34