Table of Contents
Advertisement
GUIDE Plus+ IR controllers
not working
•
Check to make sure the controllers
are positioned
correctly over the IR
remote sensors.
•
Your remote may be interfering
with the IR controller.
Place a piece of
dark tape over the IR controller.
•
GUIDE Plus+ system control
of cable box is slower than direct control of the
box itself when changing
channels.
CARE AND
CLEANING
Caution:
Turn OFF your TV before
cleaning.
You can clean the TV as required,
using a soft lint-free
cloth. Be sure to
occasionally
dust the ventilation
slots in the cabinet to help assure adequate
ventilation.
The TV's screen
may
be cleaned
with
a soft,
lint-free
cloth
as well.
Take
care
not to scratch
or mar
the
screen.
If necessary,
you
may
use a cloth
dampened
with
warm
water.
Never use strong cleaning
agents,
such as ammonia-based
cleaners,
or
abrasive
powder.
These types of cleaners
will damage
the TV.
While cleaning, do not spray liquid directly on the screen or allow liquid to run
down the screen and inside the TV. Also, avoid placing drinks or vases with
water on top of the T_L This could increase the risk of fire, shock hazard, or
damage to the TV.
CAUTION
If fixed
(non-moving)
images
are left on the screen for long periods
of
time, they may be permanently
imprinted
on the screen.
Such images
include
network
Iogos, phone numbers,
and video games.
This
damage
is not covered
by your warranty.
Extended
viewing
of
channels
displaying
these images
should
be avoided.
55
Advertisement
Table of Contents
