Table of Contents
Advertisement
RS263S_40-SN
23_12 12/23/03 2:23PM Pa4__2
Selecting Tuner Band
1. PressSOURCEto select TUNER.
2. PressBAND to select between AM or FM radio
band.
Tip: Your audio system has 32 preset stations
Tuning to a Station
PressSKIP BACKWARD _ /SKIP FORWARD _
to
select frequencies,
Using Presets
The tuner can be in either TUNE or PRESET mode.
When in PRESET mode, the PROGlight is on.
•
PressTUNE•PRESETto toggle TUNE and PRESET
mode.
•
Press SKIP BACKWARD _
or SKIPFORWARD
on the main system or PRESETUP or DOWN on
the remote control to accessthe previous or next
preset station. The display first shows the preset
program number and after a few seconds, the
frequency will be displayed. (FMPR:01 is FM
preset 1)
Auto Preset Programming
(FM only)
Pressand hold BAND button for 2 seconds to scan
stations in FM band, The stations will then be stored
as preset channels, A maximum of 32 stations can be
stored, Beware of your preset channels being erased
accidentally because the scanning and storing process
is automatic upon pressing the button, You can stop
the automatic scan by pressing any button, but the
erased stations cannot be recovered,
Manually Setting Presets
1. PressTUNE,PRESET button to enter TUNE mode.
2. PressSKIP BACKWARD _
/SKIP FORWARD
to accessthe desired frequency.
3. Pressthe PROG°SET button once.
4. The most recently accessedprogram location will
be displayed.
5. If a different program location is preferred, press
SKIPBACKWARD ,*, /SKIP FORWARD _-
to move to the desired preset number (1-32).
6. PressPROG°SET to store the selected frequency
at that preset.
Suppressing Stereo Signal
PressFM ST.to toggle between FM mono and stereo
for stereo FM stations, (Remote Only)
.......
/_:! ......
• . ...............................................................................................................................................................................
.."
8
Hide quick links:
Advertisement
Table of Contents
