RCA PS32108 Connection Manual page 26

Trouble Checks
Trouble
VCR (con_-ed)
No picture
Checks and Adjustments
For connections 2B, 2C, 3B, 3C:
1. Make sure the VCR is turned on.
2. Make sure the cable box is turned on and the VCR is tuned to the
output c.hannel (usually 02, 03, or 04) of the cable box.
3. Select channel 00 on the TV when VCR is connected to the TV using the
the AUDIO and VIDEO IN jacks.
For connections 4B, 5B:
1. Tune the TV to channel 03 or 04, the same channel the VCR CH3/CH4
switch is set to.
2. Place the TVNCFI button in the VCR position to see the picture from
the VCR.
Can't record one channel
with the VCR while
watching a different
channel on the TV
For connections 2B, 2C:
Not possible with these connections because only one channel at a time
can come from the cable box.
For connections 1B, 1C:
11 Turn on TV and select channel 00 on the TV.
2. Turn on VCR, insert tape, select channel to record with CHANNEL
buttons on VCR, and then press RECORD on VCR.
3. Press TVNCR button on VCR (also called "I'VNCR switch).
4. Change channel on TV with TV's CHANNEL buttons.
For connections 3B, 3C:
1. Turn on TV and select channel 00 on TV.
2. Turn on cable box.
3. Turn on VCR and use CHANNEL buttons on VCR to tune the VCR to
the output channel of the cable box (usually 02, 03, or 04).
4. Select channel to record with CHANNEL buttons on cable box.
5. Insert tape into VCR and then press RECORD button on VCR.
6. Change channel on TV with TV's CHANNEL buttons to view another
channel. The recording will not be affected. Tune TV to channel 00 if
you want to see what is being recorded.
24