Table of Contents
Advertisement
C@nnect @ns
Setup
CABLE OR
TV/DVD
OFF-AIR SIGNAL
S VIDEO
G LINK
_
-0R-
Note:
The back of your Dolby Digital*
or DTS** receiver
might
not
look exactly
like the one shown
here
Dolby Digital ® and DTS ®
Both l)olby Digital and 1)TS are audio R>rmats used to record 5.1-chann_'l audio signals onto the
digital track of llhn (while the tlhn is being made). Both of these tk)rmats provide up to six separate
channels:
let_, right, center, let:t rear, right rear, and common
subwoot_r.
The disc will play 5.1-channel
sound only it you've connected
a DTS or Dolby Digital receiver or
decoder
and il the original movie the disc was recorded
tYom was encoded
in the Dolby Digital or
DTS tormat.
Please
Read
This
Before
Using
the
DIGITAL
AUDIO
OUT Jack!
This unit's digital
output
jack is designed
for a connection
to a Dolby Digital
or DTS receiver or decoder.
Older digital
equipment
may not be compatible
with the Dolby Digital
bitstream.
Such a connection
can
create a high level of noise that may be harmful
to your ears, and could damage
headphones
or speakers.
It is important
to choose the correct
Digital
Output
setting
in the DVD Player's Sound menu, especially when
you use the DIGITAL AUDIO OUT jack. For more information,
see Chapter 4.
*Dolby Digital is a trademark of Dolby Laboratories Licensing Corporation
**DTS is a registered trademark of Digital Home Theater Systems, Inc.
12
Chapter
I
Advertisement
Table of Contents
