How To Fold And Move The Treadmill - ProForm 725 TL User Manual

HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, adjust the incline to the lowest
position. If the incline Is not at the lowest position, the
treadmill will be permanently damaged. Next, unplug the
power cord. Caution: You must be able to safely lift 45
pounds (20 kg) In order to false, lower, or move the
treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right. Ceutlon: To avold pinching your hands, do
not hold the treadmill in the locations Indicated by the
arrows. To decrease the possibllity of Injury, bend
your legs and keep your back straight. As you ralse
the treadmill, make sure to llft with your legs rather
than your back. Raisethe treadmill about halfway to the
vertical position.
2. Move your right hand to the position shown and hold the
treadmill firmly. Raise the treadmill until the storage latch
closes over the frame guide. Make sure that the storage
latch closes fully over the frame guide.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of di-
rect sunlight. Do not leave the treadmill in the storage
position in temperatures above 85 ° Fahrenheit.
Do not hold here
Latch.1 Closed
Frame.___
HOW TO REMOVE THE COVER PANEL
When the treadmill is in the storage position, the woodgrain-
finish cover panel will be displayed. If desired, the cover
panel can be removed to expose the black finish of the frame
cover. To remove the cover panel, insert your fingers be-
tween the lower end of the cover panel and the frame cover
at the position indicated by the arrow. Pull the cover panel off
the panel fasteners. Work your way up until the cover panel
is removed.
Frame C
Cover Panel
\
Panel
Fastener
18
Using a phillips head screwdriver, remove one of the panel
screws and panel fasteners from the frame cover, Screw the
panel screw back into the frame cover. Press the removed
panel fastener onto one of the fasteners on the cover panel.
Repeat this process,removing one panel fastener at a time,
until all six panel fasteners are removed. Store the cover
panel away from moisture and dust.
Cove, ane,\-' ;ane, J ///
,_,_ ,_ Fa:tener
Fastener