Cable-Tv Connections - GE 13GP243 Manual

Connecting Your TV
Cable-TV Connections
Follow one of these steps to connect a cable-TV system to your "IV instead of a home antenna. Since cable-TV systems
vary, you may wish to consult your local cable-TV company for additional information.
A Follow this diagram if your cable company does not require a cable box (no scrambled channels):
m
Back
Incoming _ I _'['_!, of
Cable _ ::-UJ TV
B Follow this diagram if your cable company requires a cable box that can be controlled by remote control:
m
Incoming _ @ BaCkof
Cable ,,v TV
Rememberto tune your TV tothe
outputchannel of the cable box (usually
2, 3, or 4) when selecting channelsvia
the cable box.
OUT
CABLE BOX
C Follow this diagi'am if your cable'company requires a cable box that cannot be controlled by remote control:
©
,n om,n
Cable
© m Back
® © ® ot
TV
Note: These optional accessories (2-way
splitter(_ A/B switch(_), and three coaxial
cables (c)) are available as a kit under
#AH041BL.*
CABUEBO_
The "A" position on the A/B switch lets you select all
non-scrambled channels by the TV's remote.
The "B'"position allows you to select scrambled channels
via the cable box. Remember to tune yourTV to the
output channel of the cable box (usually 2, 3, or 4)
when selecting channels via the cable box.
* V
Optionalaccessoriesarea ailablefrom mostdealersorelectronicssupply stores.
15