Table of Contents
Advertisement
6
If the menu does not appear:
Make sure the TV is tuned to the same channel as the CH3
CH4 switch or its video input (see "How to Find Your TV's
Video Input Channel"
in the References section of this
manual
for more information).
Make sure the VCR indicator
is on in the VCR display if you
connected
your VCR using the ANT. IN and OUT TO TV jacks.
Check your connections.
If you choose to set up your VCR options
individually,
then go to
the next section.
Step 8: Access the Menus
The MENU and number
buttons on the remote let you access,
select, and change your VCR's preferences.
For example, to select
a different
preferred
on-screen language than the one you
selected during the initial set up, do the following:
1.
Press MENU to display the VCR MAIN MENU.
VCR
MAIN
MENU
I
Timer
Recordings
2
Time
3
ChanneLs
4
Setup
S
Preferences
i
mi|il
0
Exit
2.
Press 6 to display the LANGUAGE
menu.
LANGUAGE
SeLect
a
Language.
L__
2
Espafiot
3
Francals
Press
MENU
to
continue
3,
Press lforEnglish,
2forEspafiol(Spanish),or3forFran_ais
(French).
All other on-screen
menus are worked
within similar ways
using the remote control to follow on-screen
instructions.
See Additional
Set-Up Features in the next section for
detailed
information
about accessing
menus.
Quick Set Guide
You can manually access the
QuickSet Guide by displaying the
VCR MAIN MENU, and selecting the
Setup feature by pressing 4.
W
Maneuvering
Menus
You can move through on-screen
menus using the numbers on the
remote control for the corresponding
choice, or by using the Channel up
and down buttons. If using the
channel up and down buttons to
scroll through choices, make
selections by pressing the MENU
button. Also note that you can use
the channel up and down buttons on
the front of the VCR to maneuver
menus, but you can not enter the
selection. Entering choices using the
MENU button
on the remote control.
Advertisement
Table of Contents
