Back Panel - GE VG2044 User Manual

Back Panel
3 CH. 4 Switch Selects the channel to which you will tune
the TV to see the VCR picture if you connect the VCR using
one of the basic hookups.
AUDIO and VIDEO IN Jacks Receives signals from
another component, like a VCR or camcorder, when it is
connected to these jacks. Use INPUT on the remote to select
"L1" to record from these jacks.
AUDIO and VIDEO OUT Jacks Sends signals from VCR
to another component, like a TV or VCR, when it is connected
to these jacks.
ANT. IN Jack Receives a signal from an antenna or cable
system when attached.
RF OUT Jack Passes signal to TV using the cable supplied.
4O