Advertisement
Repeatedly press the
AUDIO button to select
(highlight)
the function you want to change, then
press + or - to change the setting.
Press
AUDIO
to see the
audio
menu.
STEREO:
ON
The STEREO function lets you choose either monaural or stereo
audio. When a station is broadcasting stereo, the stereo indicator
(ST) will appear on the screen before the channel number. Press the
+ or - button to change between the STEREO: ON and
STEREO: OFF display. Normally, you can leave the stereo
function ON. Your TV will then automatically produce either
monaural or stereo audio-whichever
is broadcast.
Note: Some television stations transmit a "pilot" signal that makes your
TV think it's receiving stereo, even though the broadcast signal is
monaural. The "pilot" signal will make the stereo indicator (ST) appear on
the screen next to the channel number, however, you will not be able to
hear stereo sound. If the stereo indicator appears but you can not hear
stereo sound, check with the television station to inquire whether the
program being broadcast is in true stereo or monaural audio.
The TONE function allows you to select HIGH or LOW. If you
prefer to listen to the high frequencies, set the tone display to
HIGH. If you prefer to listen to the low frequencies, set the tone
display to LOW. Press either the + or - button to switch between
the HIGH and LOW display. Experiment with this feature and set it
to your personal preference.
The audio menu will automatically
disappear
from the
screen if you do not press + or - within a few seconds.
Whenever
a menu or display disappears
from the screen,
the VOL + and VOL - buttons on the front of the TV
become the volume adjustment
buttons.
9
Advertisement
