Poulan Pro PK20H42YT Operator's Manual
  1. Manuals
  2. Brands
  3. Poulan Pro Manuals
  4. Lawn Mower
  5. PK20H42YT
  6. Operator's manual
Poulan Pro PK20H42YT Operator's Manual

Poulan Pro PK20H42YT Operator's Manual

Hide thumbs Also See for PK20H42YT:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operator's Manual
IMPORTANT MANUAL
Do Not Throw Away
OPERATOR'S MANUAL
MODEL:
PK20H42YT
LAWN TRACTOR
WARNING:
Read this Manual and follow all Warnings and
Safety Instructions, Failure to do so can result
in serious injury.
ALWAYS WEAR EYE PROTECTION
DURING OPERATION
Visit our website: www.poulan-pro.com
194804
10.14.04
RD
Printed in U.S.A.

Advertisement

Table of Contents
loading

Related Manuals for Poulan Pro PK20H42YT

Summary of Contents for Poulan Pro PK20H42YT

  • Page 1 IMPORTANT MANUAL Do Not Throw Away OPERATOR'S MANUAL WARNING: MODEL: Read this Manual and follow all Warnings and Safety Instructions, Failure to do so can result in serious injury. PK20H42YT LAWN TRACTOR ALWAYS WEAR EYE PROTECTION DURING OPERATION Visit our website: www.poulan-pro.com 194804 10.14.04 Printed in U.S.A.
  • Page 2 SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS FAILURE TO OBSERVETHE FOLLOWINGSAFETY INSTRUCTIONSCOULD RESULTIN SERIOUS INJURYOR DEATH • Do not operate machine without the entire grass catcher, WARNING: In order to prevent ac- discharge guard, or other safety devices in place and...
  • Page 3 SAFETY RULES & Safe Operation Practices for Ride-On Mowers III. CHILDREN GENERAL SERVICE Tragic accidents can occur if the operator is not alert to • Never operate machine in a closed are, the presence of children. Children are often attracted to •...
  • Page 4 PRODUCT SPECIFICATIONS CONGRATULATIONS on your purchase of a new tractor. It has been designed, engineered and manufactured to give Gasoline Capacity 4.0 Gallons you the best possible dependability and performance. and Type: Unleaded Regular Should you experience any problem you cannot easily rem- Oil Type (API-SG-SL): SAE 10W30 (above...
  • Page 5 UNASSEMBLED PARTS Steering Wheel Seat (1) Washer 17/32 x 1-3/16 x 12 Gauge Steering Wheel (1) Knob Insert Steering Wheel Adapter (1) Large Flat _ e_eve (2) Keys Slope Sheet (1) Hex Bolt 1/4-28 x 1-1/4 (1) Hex nut 1/2-20 Gauge Wheels (4) Retainer,S, prings, (4) Washers...

  • Page 6: Assembly

    ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes, To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely, Use the correct tools as necessary to insure proper tightness.
  • Page 7 ASSEMBLY TO ROLL TRACTOR OFF SKID (See Op- eration section for location and function SEAT SHOULDER controls) BOLT • Press lift lever plunger and raise attachment lift lever to its highest position, • Release parking brake by depressing clutch/brake pedal. SEAT PAN •...

  • Page 8: Assembly

    ASSEMBLY ,/CHECKL IS T SPRING BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BES T PER- FORMANCEAND SATISFACTION FROM THIS QUALITY PRODUCT. SHOULDER "-- BOLT PLEASE REVIEW THE FOLLOWING CHECKLIST: ADJUSTING All assembly instructions have been completed. No remaining loose parts in carton.

  • Page 9: Operation

    OPERATION These symbols may appear on your tractor or in literature supplied with the product, Learn and understand their mean- ing, I',,I CHOKE FAST REVERSE NEUTRAL HIGH SLOW IGNITION SWITCH ENGINE START ENGINE OFF REVERSE ENGINE ON PARKING BRAKE PARKING BRAKE PARKING BRAKE OPERATION LOCKED...
  • Page 10 OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments, Save this manual for future reference, FIOS "ON" POSITION IGNITION ATTACHMENT PLUNGER...
  • Page 11 OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while op- erating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.
  • Page 12 OPERATION ATTACHMENT NOTE:Adjust gauge wheels with tractor on a flat level "ENGAGED" POSITION surface, POSITION • Adjust mower to desired cutting height (See "TO AD- JUST MOWER CUTTING HEIGHT" in the Operation section of this manual). ,",_ LOW • Remove retainer spring and clevis pin which secure POSITION each gauge wheel bar, •...
  • Page 13 OPERATION Pull up and remove oil fill cap/dipstick; wipe oil off, Re- • Avoid stopping or changing speed on hills. insert the dipstick into the tube and push down firmly • If slowing is necessary, move throttle control lever to into place.

  • Page 14: Operation

    OPERATION WARM WEATHER STARTING (50 ° F and above) • Move motion control lever to neutral (N) position, Shut- off engine and set parking brake, • When engine starts, move the throttle control to the fast position. • Engage transmission by placing freewheel control in •...

  • Page 15: Maintenance

    MAINTENANCE F"'' O TES AS YOU COMPLETE ..REGULAR SERVICE f__£,4y_e.._ SERVICE DATES Check Brake Operation Check Tire Pressure Check Operator Presence ROS Systems Check for Loose Fasteners Sharpen/Replace Mower Blades Check Battery Level LubricationOhart Clean Battery and Terminals Check Transaxle Cooling Check V-Belts Check...
  • Page 16 MAINTENANCE TRACTOR BLADE CARE Always observe safety rules when performing any main- For best results mower blades must be kept sharp. Replace tenance, bent or damaged blades, BRAKE OPERATION If tractor requires more than five (5) feet to stop at highest approved by the manufacturer of your speed in highest gear on a level, dry concrete or paved tractor.
  • Page 17 MAINTENANCE Slide blade on to an unthreaded portion of the steel bolt TRANSAXLE PUMP FLUID or pin and hold the bolt or pin parallel with the ground. The transaxle was sealed at the factory and fluid mainte- If blade is balanced, it should remain in a horizontal nance is not required for the life of the transaxle.

  • Page 18: Maintenance

    MAINTENANCE • After oil has drained completely, close and lock the MUFFLER drain valve by pushing inward and turning clockwise Inspect and replace corroded muffler and spark arrester until the pin is in the locked position as shown. (if equipped) as it could create a fire hazard and/or dam- Remove the drain tube and replace the cap onto to the age.
  • Page 19 SERVICE AND ADJUSTMENTS WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUST- MENTS: • Depress clutch/brake pedal fully and set parking brake. • Place motion control lever in neutral (N) position. • Place attachment clutch in "DISENGAGED" position. •...
  • Page 20 SERVICE AND ADJUSTMENTS SIDE-TO-SIDE ADJUSTMENT (See Figs. 17 and 18) • Raise mower to its highest position, MANDREL • At the midpoint of both sides of mower, measure height from bottom edge of mower to ground. Distance "A" on both sides of mower should be the same or within 1/4"...
  • Page 21 SERVICE AND ADJUSTMENTS BELT REMOVAL - TO CHECK AND ADJUST BRAKE • Remove mower (See "TO REMOVE MOWER" in this section of manual). (See Fig. 22) NOTE: Observe entire motion drive belt and position of all Your tractor is equipped with an adjustable brake system belt guides and keepers, which is mounted on the right side of the transaxle, •...
  • Page 22 SERVICE AND ADJUSTMENTS • Hold motion control lever in that position and turn engine NOTE: To seal tire punctures and prevent flat tires due to off, slow leaks, tire sealant may be purchased from your local • While holding motion control lever in place, loosen the parts dealer, Tire sealant also prevents tire dry rot and adjustment bolt.
  • Page 23 SERVICE AND ADJUSTMENTS REPLACING BATTERY (See Fig. 27) TO REPLACE FUSE Replace with 20 amp automotive-type plug-in fuse, The fuse holder is located behind the dash. terminals by allowing a wrench or any TO REMOVE HOOD AND GRILL ASSEMBLY other object to contact both terminals WARNING: Do not short battery at the same time.

  • Page 24: Service And Adjustments

    STORAGE Immediately prepare your tractor for storage at the end ENGINE of the season or if the tractor will not be used for 30 days or more, FUEL SYSTEM IMPORTANT:IT IS IMPORTANTTO PREVENTGUM DEPOSITS FROMFORMINGIN ESSENTIALFUELSYSTEM PARTSSUCH gasoline in the tank inside a building OR TANK AS CARBURETOR, FUEL...

  • Page 25: Troubleshooting

    TROUBLESHOOTING POINTS CAUSE CORRECTION PROBLEM Will notstart Out of fuel. Fill fuel tank. Engine not "CHOKED" properly. See "TO START ENGINE" in Operation section. Engine flooded. Wait several minutes before attempting to start. Bad spark plug. Replace spark plug. Dirty air filter. Clean/replace air filter.

  • Page 26: Troubleshooting

    TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Engine dies when Reverse operation system 1. Turn ignition key to tractor is shifted (ROS) is not "ON" while ROS "ON" position. into reverse mower or other attachment See Operation section. is engaged. Engine continues to run Faulty operator-safety presence control system.

  • Page 27: Warranty

    LIMITED WARRANTY The Manufacturer warrants to the original consumer purchaser that this product as manufactured is free from defects in materi- als and workmanship. For a period of two (2) years from date of purchase by the original consumer purchaser, we will repair or replace, at our option,...
  • Page 28 SERVICE NOTES...
  • Page 29 SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL 15 DEGREES MAX. 1. Fold this page along dotted line indicated above. 2. Hold page before you so that its left edge is vertically parallel to a tree trunk...
  • Page 30 PARTS AND SERVICE This product has been expertly engineered and carefully manufactured to rigid quality standards. As with all mechanical products, some adjustments or part replacement may be necessary during the life of your unit. For Parts and service, contact our authorized distributor: call 1-800-849-1297 •...

This manual is also suitable for:

Db185h42yt

Table of Contents