Table of Contents
Advertisement
CHOOSING
AN AUDIO
PROCESSOR
Changing the audio processor changes the way your TV sounds.
There are two ways to change the audio processor: a) from the
Audio menu, and b) by pressing SOUND on the remote. For
more, see Audio menu in the Quick Reference section.
Choosing
an audio
processor
from
the
Audio
menu
1.
Press MENU to bring up the Main menu.
2.
Press MENU
again
to select the Audio
menu.
3.
Point to Audio Processor and press MENU. The Audio
Processor choice list comes up, with the current mode
highlighted.
4.
Point to an audio processor mode and press MENU to select it
and return to the Audio menu. The options are:
Mono
PLaysthe sound in mono only.
Stereo
Splits the incoming stereo audio signal into left and
right channels.
SRS Stereo
(-)
*SRS is an audio processing technology
that
adds greater depth and stereo separation
to stereo audio
signals.
Enhanced
(,) SRS Stereo
Enhances the SRSsignal to give
the impression of even greater depth and stereo separation.
Sound Logic Stereo
Sound Logic monitors
a program's
audio track and limits the volume to a minimum
and
maximum volume range. Whenever you adjust the volume on
the TV, the minimum
and maximum volume range adjusts, too.
Second
Audio Program
(SAP) Plays the program's
audio in
a second language,
if one is available. Setting the audio
processor to SAP tells the TV to play the program's
audio in
this second language,
if one is available.
SOUND
(3
Choosing
an audio
processor
from
the
remote
1.
Press SOUND to display the audio processor choice list.
2.
Point to and select a different
audio processor or press CLEAR
to exit.
*SRS, Sound Retrieval System and the SRS logo (o) are registered
trademarks
of SRSLabs, Inc.
The number
of audio
processor
choices awLilable
depends
on the type
of signal you are currently
using.
For
example,
depending
on the way you
have your VCR connected
to the TV,
the number
of choices is greater
when
you are watchingl
TV than
when
you are watchincl
a video
tape.
53
Advertisement
Table of Contents
