RCA C29522 User Manual page 46

(Channel Menu continued)
Auto Tuning Displays a choice list that lets you set up the TV to
automatically tune to the correct input channel when you press a
component button (VCR1, DVD-VCR2, or SAT-CABLE).
Set VCR I Channel Displays a choice list that lets you select
the channel that the TV tunes to when you press the VCR1
button.
Set DVD,VCR 2 Channel Displays a choice list that lets you
select the channel that the TV tunes to when you press the
DVD-VCR2 button.
Set SAT,Cable Channel Displays a choice list that lets you
select the channel that the TV tunes to when you press the
SAT,CABLE button.
The choices are:
Not Connected Choose this if you do not have a
component connected to an antenna or video input on the
back of the TV, or if you don't want the TV to tune to a
channel when the particular component button is pressed.
Channel 2 Choose this if your component is connected to
the antenna jack on the back of the TV, and you want the TV
to tune to channel 2 when you press the specified
component button. Reminder: Make sure the component's
Ch 2/3/4 switch is set to channel 2.
Channel 3 Choose this if your component is connected to
the antenna jack on the back of the TV, and you want the TV
to tune to channel 3 when you press the specified
component button. Reminder: Make sure the component's
Ch 3/4 switch is set to channel 3.
Channel 4 Choose this if.your component is connected to
the antenna jack on the back of the TV, and you want the TV
to tune to channel 4 when you press the specified
component button. Reminder: Make sure the component's
Ch 3/4 switch is set to channel 4.
Video 1 Input Choose this if your component is connected
to the Video 1 jacks on the back of the TV and you want the
TV to tune to Video1 input when you press the specified
component button.
Video 2 Input Choose this if your component is connected
to the Video 2 jacks on the back of the TV and you want the
TV to tune to Video 2 input when you press the specified
component button.
44