Table of Contents
Advertisement
LD/CDV/CD
1
-To check the program contents
During program playback or in stop mode, press PGM to
display the program contents on the monitor screen. When
PGM is pressed again, the program contents disappear.
]
l
o modify the program contents
To erase a programmed
chapter/track
or pause
1
2
3
4
Press PGM.
Press SKIP 14< or _
to place the cursor (),) on the left
side of the chapter/track or pause to be erased.
Press CLEAR.
Press PGM to complete
programming.
Pressing PLAY _-
also completes programming and starts program playback
with the new program contents.
J
To change a programmed
chapter/track
or pause to a
new one
1 Press PGM.
2 Press SKIP _
or _
to place the cursor (),) on the left
side of the chapter/track
or a pause to be changed.
3 Enter the new chapter/track number with the digit buttons.
Press PAUSE II to enter a pause.
4 Press PGM to complete programming.
Pressing PLAY D.-
also completes programming and starts program playback
with the new program contents.
• A programmed chapter/track being played cannot be erased
or changed.
• A programmed pause already engaged cannot be erased or
changed.
To go to the previous or next chapter (track) in a program:
Press SKIP I_
or _
on the remote control unit.
Total time display (CD and CDV only):
When programming
for CD or CDV, the total time of the programmed
tracks is displayed. If the total time exceeds 1O0 minutes, 100's digit
will not be displayed in the display window of the front panel.
•
If track No. 33 or more is programmed,
the total time will not be
displayed.
To _ew
the program
contents
in the fYont panet _ispta¥
wlrtdow:
Programmed
chapter/track
r_umbers
_ight up on the v_sua_ calendar.
CAUTION
•
If the shuttle ring is used to fast-forward or fast-reverse (scan)
during Program Playback, the playback position will move to
another chapter/track, but when the shuttle ring is returned to its
home position, the next chapter/track in the program will be
played.
•
If I_ MULTI-SPEEDis pressed during program playback, the unit
will enter multi-speed playback mode and the playback position
will move to successive chapters according to the order of the
program.
_
_
MUL'T\-_tP_-E[b
is
pressed
_ur_ng
_rogram
p',ahtback,
mu\t_-
speed
playback
will
begin
in the
reverse
direction
but
program
playback
wi_t not be carried
out.
•
Do not program
chapter/track
numbers
which
do not exist on the
disc, as this may inhibit execution of the program.
35
<VRB1142>
Hide quick links:
Advertisement
Table of Contents
