Recorder (Vcr-Dvd+Rw); Recorder And Othera/V Devices - Philips 42PF9996 Owner's Manual

There is a wide range of audio and video devices that can he connected to your TYSThe following
connection diagrams show you how to connect them to theTY
AV1 can handle YPbPr,Y/C and CVBS; AV2 YPbPr (RGB)_CVBS and Y/C; HDMI (AV3) ; Side: CVt_Sand Y/C,
Recorder
(VCR-DVD+RW)
Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the
display Keep a minimum distance of 20" from the screen.
O Connect the RF Antenna or Cable TV cable (eventually
AV2
?sn CVBS S-VlDEOj
®
RECORDER
via an optional two-way signal splitter and/or CableTV
converter box) (_) to the RF IN socket of your
recordel:
Connect another RF cable (_) from the output OUT of
your recorder to the TV's input 75 _] -n- jack.
Better playback quality can be obtained if you also
connect theVideo, Audio Left and Right (only for stereo
devices) AV cables (_) to the CVBS, AUDIO L and R
input jacks of AV2.
If your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable
with the S-VIDEO input instead of connecting the
recorder to the CVBS jack of AV2.
S-Video does not provide audio, so audio cables must
still be connected to provide sound,
Recorder and otherA/V devices
O
MONITOR
OUT
AV2 AV1 I
° o
........ L®I o
"
RECORDER
Connect the RF antenna cable _ of the RF IN socket
of your other AV device.
Connect the RF output of the AV device to the RF input
of the recorder (_).
Connect another RF cable (_ from the output OUT of
your recorder to the TV's input 75 Ohm -li- jack.
To obtain better quality, also connect theVideo or
S-Video, Audio left and Audio right cables of both devices
to AVI (Y or S-VIDEO, AUDIO L and R,) (_) and to AV2
(CVBS or S-VIDEO, AUDIO L and R) (_),
Notes:
In case of mono equipment, only the left loudspeaker
reproduces sound. Use a mono to stereo adapter (not
supplied) for sound reproduction via all internal
loudspeakers.
- _4Zhenusing the S-VIDEO connector do not connect any
device to the AV2 CVBS or AV1 Y input.
19