Advertisement
Available languages
Available languages
EDGER
SAFETY
_,WARNING:
Inspect
the area to be
edged
before
each
use.
Remove
objects
(rocks,
broken glass,
nails, wire, etc.) which
can
be thrown
by the blade
or can
wrap
around
the shaft.
• Blade rotates momentarily
after the trigger
is released.
The blade
can seriously
cut
you or others.
• Allow blade to stop before removing
it from
the cut.
Blade rotates
after the
Allow blade to stop
beforeremovingit
fromthe cut.
• Throw away blades that are bent, warped,
cracked,
broken
or damaged
in any other
way.
Replace
parts
that
are
cracked,
chipped,
or damaged
before using the unit.
• Do not attempt to remove cut material
nor
hotd material
to be cut when the engine
is
running or when cutting
blade is moving.
• Always keep the wheel and depth adjusting
skid in contact with the ground.
• Always
push
the
unit
slowly
over
the
ground.
Stay alert for uneven
sidewalks,
holes in the terrain,
large roots, etc.
• Always use the handlebar
when using edg-
er attachment.
BLOWER/VACUUM SAFETY
_WARNING:
Inspect
area
before
starting
unit. Remove
all debris and hard ob-
jects such as rocks, glass, wire, etc. that can
ricochet,
be thrown, or otherwise
cause injury
or damage
during operation.
• Do not set unit on any
surface
except
a
clean, hard area while engine
is running.
Debris
such as gravel, sand, dust, grass,
etc., could be picked
up by the air intake
and thrown out through
discharge
opening,
damaging
unit, property,
or causing serious
injury to bystanders
or operator.
• Never
place
objects
h_side
the
blower
tubes, vacuum
tubes or blower
outlet. AF
ways direct
the blowh_g debris away from
people,
animals,
glass,
and solid objects
such as trees, automobiles,
wails, etc. The
force of air can cause rocks, dirt, or sticks to
be thrown
or to ricochet
which
can hurt
people
or animals,
break glass,
or cause
other damage.
• Never
run unit without
the proper
equip-
ment attached.
When using your unit as a
blower, always
install blower tubes.
• Check air intake opening,
blower
tubes or
vacuum
tubes frequently,
always
with en-
gine stopped and spark plug disconnected.
Keep vents and discharge
tubes free of de-
bris
which
can accumulate
and
restrict
proper air flow.
• Never place any object in air intake opening
as this could
restrict
proper
air flow aed
cause damage
to the unit.
• Never use for spreading
chemicals,
fertiliz-
ers, or other substances
which may contain
toxic materials.
• To avoid spreading
fire, do not use near leaf
or brush
fires, fireplaces,
barbecue
pits,
ashtrays,
etc.
BRUSHCUTTER
SAFETY
,,_ DANGER:
Blade can thrust vioienfly
away
from material
it does not cut.
Blade
thrust can cause amputation
of arms or legs.
_& WARNING:
Do not use trimmer head
as a fastening
device for the blade.
£x ,..__....._
/IIW/-_HNINL_:
The blade continues
to
spin after the throttle
is released
or engine is
turned off. The coasting
blade can throw ob-
jects
or seriously
cut
you
if accidentally
touched.
Stop the blade
by contacting
the
right hand side of the coasting
blade with ma-
teria_ already
cut.
Stop coasting
Made by contact
with cut material.
®
=I=
="=WARNING:
Inspect
the area to be
cut before each use. Remove
objects (rocks,
broken glass,
nails, wire, etc.) which can be
thrown
or become
entangled
in the blade or
trimmer
line.
• Throw
away
and replace
blades
that are
bent, warped,
cracked,
broken or damaged
in any other way.
• install required shield properly
before using
the unit.
Use the metal shield for all metal
blade use.
4
Advertisement
