Philips 17PF9945-37 Directions For Use Manual page 19

If you have connected the TV's AUDIO
UTPUTjacks to the AUDIO INPUT jacks
on a stereo receiver (see the Quick Use Guide
fbr connection instructions), set AUDIO OUT
to either VARIABLE or FIXED to determine
whether you adjust the volume at the stereo
or at the T_ lf you select VARIABLE, change
the volume at the TV using the TV's remote
control, lf you select FIXED, adjust the vol-
ume at the stereo using the stereo's controls.
_) select FIXED or VARIABLE, follow these
steps.
Press the MENU button on the
remote control to show the onscreen
menu,
Press the CURSOR DOWN to high-
light SOUND.
Press the CURSOR RIGHT and the menu will shift to the left. EQUALIZ-
ER will be highlighted and an adjust-
ment bar will be shown to the right.
Press the CURSOR DOWN repeated-
ly until AUDIO OUT is highlighted,
Press the CURSOR RIGHT or
LEFT to toggle the AUDIO OUT con-
trol to Fixed or Variable. m rRlUI[II[I]I ]a+llll
Press the STATUS/EXIT button to
remove lhe menu from lhe screen.
|L|l]l](lII) l ]]+l!lt|h|h,
) ) :
FIXED - If FIXED is selected, the sound
coming from the TV and being heard
through an external audio system is not
adjustable with the television's volume
controls, The volume would have to be
adjusted at the audio syslem.
VARIABLE - If VARIABLE is selected,
the sound coming from the TV and being
heard through an external audio system can
be adjusted at the TV using the Volume +
or - buttons on the television or remote
control,
The connection instructions for an external
audio system can be found in the Quick
Use Guide supplied with your TV.
BRIGHTNESS :)
• SOUND COLOR ......
• FEATURES PICTURE
• INSTALL SHARPNESS
TINT
• PICTURE EQUALIZER
BALANCE
• FEATURES AVL
• INSTALL INCR.SURROUND
STEREO
SOUND
IZOHZ
• BALANCE 500HZ
• AVL I50OHZ
• INCR.SURROUND 5 RNZ
• STEREO IOKNZ
!
SOUND
! AVL
• INCR.SURROUND
• STEREO
• SAP
T
OR
19