Weak Channel Installation; Uninstall Channels; Favorite List - Philips 32PFL7332D/37 User Manual

TV menu I Ins_iladon
Channels Instal_atlon update
Channel tuning
Available channels:
- Cable (analog NTSC or digital QAM): max. from 1 to 125
- Antenna (analog NTSC or digital ATSC): max. from 2 to 69
If a tuned channel is not yet in the master channel map, the TV will attempt
to tune the channel and it will be added to the map.
If the channel is not acquired, a message will appear that the channel is not
available.
When you tune an audio-only digital subchannel, a display appears with the
message Audio only.
Note: Subchonnel selections
- The new standards empbyed with digital broadcasting mare it possible to receive
multiple program channels under a single major channel number which can be
selected by pressing the digit remote_control dimct-acces channel number entry.
- The number of channels shown at installation inclu@s paid channels but you
may not be able to see all o/' them unless you sign up with cable TV operators,
Important:
A_er the installation of the TV channels has been done, always make a selection
in the Installation menu between Antenna or Cable whether you want to watch
Antenna TV channels or Cable TV channels,
If you make use of a signal splitter do not forget to put the switch in the
corresponding position.
Installation update
(only with Digital TV broadcasting)
This allows you to automatically tune to and update all available digital channels.
Notes: this will not reinstall uninstalled channels;
digital channels that are not encountered any longer will be removed;
new channels found will not be added to any favorite list;
already installed channels will not be renumbered.
Weak channel installation
This enables you to do a weal< ATSC digital channel installation. This is only
available for TV channels installed via an antenna connection (see p. 4).
_[_ If a certain channel you expect to see is not tuned or is weal<, you can install
it manually. Call your local broadcasting station to know what channel its
being transmitted on.
O Select that channel in the displayed list of TV channels (in the antenna mode).
The signal strength is displayed and updated continuously as you rotate the
antenna.
Installation mode
This allows you to select the already scored terrestrial or cable TV channels,
Choose for Antenna or Cable whether these signals are present.
Uninstall channels
This allows you to uninstall a stored channel so that it is no longer possible to
tune to. This also allows you to reinstall an earlier uninstalled channel.
Select the channel you want to uninstall.
Press the green color button to uninstal[ the selected channel.
The uninsta[[ed channel is indicated in the list by an icon in front of the
uninstalled channel.
Press the green color button again to reinstall the uninstalled channel.
Note : Uninstalled channels am not reinstalled dunng an installation update.
19