Download Print this page

Ice Service - Maytag 61005032 User Manual

Advertisement

Available languages

Available languages

Ice Service
The freezer
compartment
is equipped
with ice cube
trays and an ice storage bin. The bin stacks on top of the
stacked ice cube trays. To release the ice cubes from a
tray, hold the tray upside down over the bin and twist
both ends.
The refrigerator
is automatic
ice maker
ready.
The
number for the ice maker kit needed appears on the data
plate (see front cover).
ISIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
_####;#######
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
Adjustable
ice Level (select models)
Some factory installed ice makers are equipped
with a
sensor arm to adjust the amount of ice in your ice storage
tray for times when less ice is needed.
To adjust the amount
of ice produced:
Push the plastic
sensor arm inward and rotate to the desired capacity.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
INote:
,2,in
th., po.,ed o,, t he ]
refrige_al0i
_tt_e
lime 0f pUrchaSe dO noi include
I
optioilal ice maker energy usage.
]
Automatic
ice Maker
Afteryourrefrigeratorhas
beenconnectedtothe
water
supply, move the wire lever arm into the down position.
This will startits
operation.
Theicemakerwill
fill with
waterwhenthefreezerreachesthepropertemperature.
It
maybe8to
12hoursbeforetheicemakerfurnishesany
usableicecubes.
Discardallthecubesfromthefirsttwoorthreebatches
made. These initial ice cubes maybe
irregularly
shaped,
discolored,
or contain
impurities
from the new water
iiiiiiii!iiiiiiiiiiiiiiiiiiiiiiiliiiiiiiiiiiii
supply piping.
When the ice cubes are ejected it is normal for several
cubes to be joined together
at the ends. They can easily
be broken apart. The ice maker will continue to make ice
until the supply of ice cubes raises the wire lever ann,
shutting the ice maker off.
To manually
stop the operation
of the ice maker, move
the wire lever arm into the up (off) position.
Certain sounds may accompany the various cycles of the
ice maker.
• buzzing of the water valve
• running of the water as the tray fills
• rattling of the ice cubes falling into an empty ice bin.
If the ice is not used frequently, the ice cubes will become
cloudy, shrink, stick together and taste stale. Empty the
ice storage bin periodically
and wash it in lukewarm
water. Be sure to dry the bin before replacing it.
To check the ice level or gain access to the ice bin, lift
open the door on the ice bin.
To remove the bin, first turn off the ice maker.
This is
done by opening the door on the ice bin and moving the
ice maker wire lever up to the "off" position.
Then reach
under the bin front and pull down on the back edge. After
it snaps free, pull the bin straight forward.
To replace the
ice bin, align the bottom rails to the corresponding
shelf
grooves
and push it straight
back until it stops and
latches.
Make sure the tabs at the back of the bin that
turn the spiral auger are positioned
between the prongs
from the auger motor.
Turn the ice maker on by low-
ering the wire arm.
Beverages
and foods should not be placed
in the ice
storage bin for quick chilling. These items can block the
wire lever ann, causing the ice maker to malfunction.
m
For Your
Safety
l)u not I)M_: )in_{,ws or hands ,mth(
mfl:_)matic i_:_
u ak_ )gm ,(,,ha)n,sm_ h_l( ih( _( In_( )ahn )s I)|u_('(l m
I!nd(,r
e('lJ:ain rim'
(-ircm)islmm_>s.
ice _'ubes )))av ]x:>
combination
of l_eh)rs
su( 1_ as c_Main
c])arat,h_rislJcs
9
Conthmed
(,_)llSUml)li_)ll
OI:sIWII
(]is_)h m-'d i_- ('ul)(,s
may 1)(, inlmJous
to health
If s_M_ diseolormon
is
(_l_serv_,(l, dis_-ar(| the ic_- m)l)('s and _mta('t
your
])wa] wal(,r utilit_ ()r wat(_r lwatnm)lt
om]pa))\

Advertisement

loading