Sensitivity - Panasonic Lumix DMC-TZ4 Operating Instructions Manual

@Shutter speed and ISO sensitivity are displayed in the screen for a few seconds after
recording.
@ If interference becomes noticeable, we recommend reducing the setting, or selecting
'NATURAL' in the 'COLOR MODE' (R62).
@Blurring may occur depending on brightness, and size, position, and speed of
movement of the subject (e.g. if subject is too small, is on edge of picture, or starts
moving as soon as shutter button is pressed).
@Scope of flash recording (R39)
Set ISO sensitivity (sensitivity to lighting) manually.
We recommend higher settings to take clear pictures in darker locations.
IISet-up: Mode dial I_1 -_ Press 'MENU/SET' -_ Select 'SENSITIVITY' (P.20)
==Settings: / 100 / 200 / 400 / 800 / 1600
Setting guide
TIVITY I 00 600
Location Bright Dark
(recommended) (outdoors)
Shutter speed Slow Fast
Interference Low High
@AUTO: Automatically set with range up to 400 (1000 when using flash) according to
brightness.
@'I.EXPOSURE' will not operate when set to '100'.
@Scope of flash recording (R39)
@Cannot be set when 'INTELLIGENT ISO' is used ( is displayed)
@ If interference becomes noticeable, we recommend reducing the setting, or selecting
'NATURAL' in the 'COLOR MODE' (R62).
VQT1P79
57