Setting The Clock And Language; To Change Time Setting; To Set Language - Panasonic Lumix DMC-TZ4 Operating Instructions Manual

Set REC/PLAY switch to _ before turning on power.
I urn on the power
'PLEASE SET THE CLOCK' will be displayed
when power is turned on for the first time.
OF ON
1
REC/PLAY switch
IITo change time setting
Select 'CLOCK SET' from
SETUP menu (P.22),
perform 3 and 4.
IITo set local time at
overseas destination
'WORLD TIME' (P.54)
IITo set language
Select 'LANGUAGE' (R27)
from SETUP menu, and set
to language displayed on
the monitor.
@ Example of SETUP menu
setting (R20)
While this message is displayed
Press 'MENU/SET'
Adjust year, month, date, time
_ Select : ..............................
Select to change date format
Adjust
• To cancel -_ Press _,
• [M/D/Y]
!2:34 JAN. 1. 2008
• [Y/M/D]
2008, 1.1 12:34
• [D/M/Y]
12:34 1.JAN.2008
Set
Press 'MENU/SET'
• Turn on power again and check time display.
(Time and date can be displayed by pressing
[DISPLAY] several times.)
@ Failure to set the date and time will cause the date/time to be improperly printed when
printing pictures in digital photo center or when using 'TEXT STAMP' (R73).
@Time is displayed in 24-hour format. Year can be set between 2000 and 2099.
@Clock settings will be saved for approx. 3 months even after battery is removed,
provided a fully-charged battery was installed in camera for the 24 hours beforehand.
VQT1 P79
19