Repeat Function; Search Function - Technics SL-PD947 Operating Instructions Manual

Special Features ,.o°,,°u.o,
r 4t4 SEARCH I_b'.
_s
©
/
Repeat function ,,..o,,.,..=.
from the remota control.)
You can use this function in all play modes.
Press REPEAT before or during play.
REPEAT
The repeat indicator will illuminate.
I <[1]) (2:1) (3) 4[4:> <(5) / I"_/"7 /-7 I-7 ' t"7/_
L/L/.
Repeat indicator
To cancel repeat function
Press REPEAT again.
REPEAT
Search function
(Also available from the remote
In sequential play mode:
All tracks of all discs will be played repeatedly.
In program play mode:
The changer plays only the programmed selections in the pro-
grammed sequence repeatedly.
In delete play mode:
The changer plays the discs and tracks excluding the selections to
be deleted repeatedly.
In random play mode:
When the changer has played all the tracks onall the loaded discs,
it will selecta newrandomsequenceandplay continuously. T hese-
quence differseach time.
In spiral play mode:
The changer plays all tracks of all discs repeatedly in the sequence
of spiral play.
The repeat indicator will go out.
control.)
You can search rapidly forward or backward on the disc for
specific sections.
In the play or pause mode, press and hold 44 or
SEARCH b_
I I J I_1_ " YOU can search forward.
4"4 "You can search backward.
Release the button when you reach desired point.
The changer moves slowly at first and then rapidly if the button is
held down for more than about three seconds.
In the play mode, the sound level decreases by 12 dB (1/4).
In the pause mode, no sound is heard. It remains at the point where
4141 or I_1_ is released.
In sequential play mode:
You can search forward over discs and backward within the cur-
rent disc.
In other play modes:
You can search forward or backward only within the current track.
28