Panasonic Lumix DMC-ZS7 Operating Instructions Manual page 52

Useful for enlarging and saving parts of maps, etc.
[] To register zoom enlarged size and position
_h Enlarge with _2hPress
zoom lever and
select position ,0_-_--_ _
with ,L T 4 m,-
[+] Zoom Mark
• To change zoom and
position: Perform steps (_
and
• To finish Zoom Mark setting:
Restore zoom to original
(1 x) ratio
Displayed on registered pictures
[] To view registered ratio and position:
_b Display picture @ Turn to T side
with [+,] (No need to manually
/
enlarge or move)
Zoom lever
immediately displayed at
registered ratio and position
. To cancel
Zoom Mark
[CANCEL
MARK]
(below)
®When a picture with a Zoom Mark is deleted, both the original picture and picture with
Zoom Mark will be deleted.
®Picture can be deleted even while zoomed in.
A special menu (s used in [CLIPBOARD] Mode.
[REC ON CLIPBOARD] menu (REC/PLAY switch: O Mode dial: _)
[PICTURE SIZE] [2 M] []_ (Priority to picture quality) / [1 M] [] (Priority to the number of pictures)
[AUDIO REC.] Record sound (5 seconds) simultaneously. [OFF] / [ON]
[LCD MODE] [OFF] / [AUTO POWER LCD] / [POWER LCD] (--_23)
CLOCK SET] (_22)
[PLAY ON CLIPBOARD] menu (REC/PLAY switch: (_ Mode dial: [_)
[CANCEl.. _ Select [+] marked clipboard picture with 4 _-.
MARK] @_ Cancel with [MENU/SET].
Copy single pictures from clipboard to card. (Zoom Mark will not be copied.)
[coPY] • Select clipboard picture with 4_- and press [MENU/SET].
Select [YES] with A _' and press [MENU/SET].
[LCD MODE] [OFF] / [POWER LCD] (--_23).
€,Other items on the [SETUP] menu will reflect settings made in the [PROGRAM AE]
Mode, etc.
VQT2R20
111