Advertisement
Operating Instructions
1. Wired Remote Controller
Press @
button to turn on the indoor.
2
Press I_
button to select Heating mode.
3
Adjust the desired temperature by pressing (_) (_) buttons.
When setting the desired temperature
lower than room temperature,
there is only ventilation wind.
TEMP
o;o Setting Temp Range • 16°C~30°C.
2. Wireless Remote Controller
I_ UU
ON
/ OFF
TEMP
_
AIR FLOW
Press the ONIOFF button.
The unit will respond with beep sound.
ON / OFF
Press MODE button to select Heating
Mode.
MOD%
3
Set the desired temperature by pressing TEMP button.
Press ROOM TEMPERATURE CHECKING button to check the roorr
temperature.
When setting the desired temperature is lower than room
temperature, heating wind isn't blow out.
To raisethe temperature
To lower the temperature
÷ Setting Temp. Range in
Heating Mode : 16~30°C
(60°F~S6°F)
Set the fan speed again. You can select the fan speed in four
steps-low, medium, high, or chaos. Each time the button is pressed,
the fan speed mode is shifted.
FAN SPEED
12 Air Conditioner
Advertisement
