Panasonic DVD-LV70 Operating Instructions Manual page 44

Troubleshooting Guide
Problem Solution Page
The monitor is dark. Adjust the brightness. 19
The picture is disrupted Some disruption is normal.
during fast forward and
rewind.
No picture on the monitor
(including video from
another unit).
Picture doesn't appear on
the television (or the size
of the picture seems
wrong).
LCD pixels turn black or
radiate different colors.
Check connections.
Ensure the video input setting is correct.
eWhile you are playing a disc "LINE-IN" should be off.
oWhile you are viewing video from other equipment "LINE-
IN" should be on.
Select a picture mode other than "4 (Off)".
Ensure the power of the connected equipment is on.
Check connections.
Check that the television is on.
Check that the input mode on the television is correct.
Check the settings in "5 TV Aspect".
The LCD is constructed with precision technology so 99.99 %
of the pixels are active, but of the remaining of 0.01%, there
are pixels that may be black or emit light constantly.
This phenomenon is not a malfunction.
31
31
19
32
33
_QT5897
NO PLAY
"bAT Err" and a number
appear on the display.
The unit cannot play this disc. 8
"bAT Err 1": A problem has occurred with the battery pack.
Consult your dealer.
"bAT Err 2": The pack has been recharging for
12 hours but has failed to recharge for some
reason. Recharge again.
"bAT Err 3": The battery pack has overheated during
recharging. Allow the pack to cool down
before recharging again.
Go to the initial settings menu and turn the On-Screen
Messages on.
Messages do not appear 28
on the television.
On-Screen Menu Icons Go to the initial settings menu and change the position of 28
are cut off or are not the On-Screen Menu Icons.
displayed at all.
Ul 1 Wipe the disc clean. 9
H DE}
L-IFI stands for a number.
Trouble has occurred. The number appearing after H
depends on the problem. Turn the unit off and on again.
Alternatively, turn the unit off, disconnect the power source
(AC or battery pack), reconnect the power and turn the unit
on again.
If the service numbers fail to clear, note the service number
and contact a qualified service person.