Table of Contents
Advertisement
INSTALLATION
Installation
Television
Location
This unit is intended to be used with an optional stand or entertainment center. Consult your
dealer for available options.
[]
Avoid excessive sunlightor brightlights, includingreflections.
£3 Keep away from excessive heat or moisture. Inadequate ventilation may cause internal
componentfailure.
£3 Fluorescent lightingmay reduce remote controltransmittingrange.
£3 Avoid magneticequipment,includingmotors,fans, or externalspeakers.
Optional Cable Connections
Shielded audio and video cables should be used between components. For best results:
O
Use 75-ohm co_tal shielded cables.
£3 Use appropdate input and outputconnectorsthat match your component connectors.
[]
Avoid long cables to minimize interference.
AC Powe r Supply Cord
.....
CAUTION: TO PREVENTELECTRICSHOCK,MATCHWIDEBLADEOF PLUGTO
WIDE,SLOTOF AC OUTLETANDFULLYINSERT.DO NOT USE A PLUGWITH A
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTEDTO PREVENTBLADEEXPOSURE. FOR SOME MODELSTHATARE
NON-POLARIZED, THE USEOF AN AC ADAPTORCONNECTOR MAY
BE NECESSARY.
Polarized plug
Cable / Antenna
For proper reception, either a cable or antenna connection is required.
Cable Connection
Connect the cable suppliedby your local cable company.
Note:
A cable converter box may be required for proper reception.
Check
with your local
cable company for compatibility
requirements.
Antenna Connection
Incoming Cable from
Cable Company
75 Ohm VHF/UHF
on back of TV
For proper receptionof VHF/UHF channels, an extemal antenna is required. For
best receptionan outdoorantenna is recommended.
Antenna Mode must be set to TV in the SETUP menu.
-_,
Cable Preset
Cable Mode is preset at the factory.
Antenna users must change to Antenna
Mode in the Setup Menu.
Incoming
Cable from
Home Antenna
[]
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
