Programming Mode - LG CW2079CWN Operating Instructions Manual

@ Programming mode
: You can check machine information or change setting on "Program setup", "Collect Information Data", "Diagnostic Test".
There are two methods that you can enter programming mode.
@ Case1. Check the programmingmode by button
How to enter "Programming mode"
How
to use button
You can enter programming mode
only for Idle state and pause state.
- Card Type
1) Insert service card.
2) Display will show "LqC 1"
- Coin Type
1) To enter the authorized programming mode, you
have to open a SVC door within 30 minutes after
PDA communication with machine.
2) Open the Service door.
3) Display will show "LqCI"
You can change Washer vend price, cycle time and
Cycle parameters, etc.
WHITES Move to upper level or
Comes back to Idle State
COLORS Move to the mode in the
same level (+)
DELICATES Move to the modes in the
same level (-)
START Enter the selected mode
Coin Vault
Openings:
close
Service door:
open
Insert Debit
Card
- COIN TYPE - -CARD TYPE-
10