Erasure Prevention - Technics SD-S747 Operating Instructions Manual

_ ress to Seleci the desired
source to be recording.
Press < or )' to begin record-
ing, and play the source to be
recorded.
)' : To begin recording from the forward
side.
4 :To begin recording from the reverse
side.
N/'tN
U U U _
"° "
Illuminates
j rAVm_l
When recording on both sides of the
tape, be sure to press the )' button.
To temporarily stop recording
• REC PAUSE
%
Press • REC PAUSE.
To resume recording
Press either 4 or b', corresponding to the side of
the tape side indicator which is lit.
K2 = OBS_
o
Tape side ind
About the selection of the Dolby NR type
The Do[by NR effect can be obtained by using the same type of
Dolby NR dudng both recording and playback. Refer to the follow-
ing table when selecting the type (either B or C).
Use this type when the deck on which the tape will
Type B be played back is equipped with only type B Dolby
NR.
Use this type when the deck on which the tape will
be played back is equipped with type C Dolby NR.
Type C (for example, when this unit is also going to be
used to play back the tape.)
Erasure prevention
Remove the tab(s).
Use a screwdriver
Tab fc side =A" or similar object to
Tab for side "B" break out the tab.
To re-record on a protected cassette
Cover the stot with adhesive tape.
Attach tape.
To stop recording
Press El.
39