Recommended Av Connections - Panasonic TH-50PX75U Operating Instructions Manual

40
Recommended AV Connections
These diagrams show our recommendations for how to connect the TV unit to your various equipment.
For other connections, consult the instructions of each piece of equipment and the specifications (p. 47).
For additional assistance, please visit our website at: www.panasonic.com
www.panasonic.ca
Front of the TV Back of the TV
Power Cord
(Connect after all the other
connections are complete.)
t
I
• To listen to the
TV through
speakers
Amplifier
OPTICAL IN
t
or
Optical digital
audio cable
• To watch DVDs
DVD Player/Set Top Box
or
• DVD Recorder /
VCR
_ Connect with
_ or _R_
f_
--_,A_ HDMI cable
, HDMI-DVt
Conversion cable
+ Audio cable
\
@The picture and audio input signals connected to a
terminal specified in "Monitor out" (p. 36) cannot be
output from "PROG OUT" terminals.
However, audio output can be obtained from
"DIGITAL AUDIO OUT" terminal.
@To prevent howling and image oscillation, set the
"Monitor out" setting when connecting the VCR with
loop-connection. (p. 28, 36)
@When equipment (STB, DVD, etc.) is connected to
HDMI or COMPONENT terminals, only audio signals
can be obtained. From the output terminals, no video
signals can be passed.
@When receiving digital channel signals, all digital
formats are down-converted to composite NTSC
video to be output through the PROG OUT terminals.
_rtr_'_vA i [--"k"lrl_[0] i| i[_1,_ | [11]i_
Follow the connection diagrams below for HDAVl control of
a single AV piece of equipment such as a Panasonic DIGA-
DVD recorder, RAM theater, or Player theater system.
Refer to page 30-31 for Setup Menu settings and additional
control information.
® Optional HDMI and/or optical cables are not provided.
If connection (or setting) of equipment compatible with HDAVl
control is changed, switch the power of this unit Off then On
again while the power of all equipment is On (so that the
unit can correctly recognize the connected equipment) and
check that DIGA, RAM theater, and Player theater playback
operate.
Note
@HDMI 1 is recommended.
When connecting to HDMI 2, set the input mode to HDMI 2 (p. 24) initially before connecting to HDMI 2. After
connection, confirm the HDMI control functions (p. 30-31 ).
mConnecting this unit to the DIGA, RAM theater, or Player
theater
@For DIGA: Connect with HDMI cable
@For RAM theater and Player theater:
Connect with the HDMI and audio cables.
If audio cable is not connected, you cannot listen to the TV
program through the theater system.
mConnecting this unit to a DVD
recorder and AV amp
When using an "EZ Sync" audio-video
amplifier and a compatible DIGA recorder,
use a daisy chain connection as shown
below.
Back of the TV
AUDIO
IN
or or
HDMI HDMI
(AVOUT) (AVOUT)
or
Panasonic RAM theater / DIGA
Panasonic Player theater (Panasonic DVD Recorder)
HDMI
(AVOUT)
Panasonic
HD Camc0rder
Digital Audio
out
l
HDMI cable
HDMI
(AV IN)
DIGA
(Panasonic DVD Recorder)
HDMI
(AVOUT)
Panasonic AV amp
@One AV amp and one DtGA recorder can be operated with this unit.
@Be sure to connect the AV amp between this unit and the DIGA recorder.
mSetting of this unit after connection
After making connections as shown above, set "EZ Sync" (under "EZ Sync setting") to "On" using the Setup menu.
(p. 30-31).
Note
@Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their
respective operating instruction manuals.
@When audio from other equipment connected to this unit via HDMI is output using "DIGITAL AUDIO OUT" of this
unit, the system switches to 2CH audio.
(When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)
;U
(1)
0
0
41
(1)
Q.
(1)
Q.
<>
©
0
_D
o