Advertisement
and t able t onnecUons
Unhook the antenna from your previous TV
or VCR and connect it to the back of the
Combination
VCR as shown in the diagram.
I1 =your antenna system has separate UHF
and VHF lead-ins, you need a UHF/VHF
Band Mixer (not supplied).
from
Antenna
Back of Combination
VCR
L
, =_.'.' _',_.."i [
_(_='
.
o
,_;
,,,, ":',_
or
" " "-_
'
300-75 ohm Transformer
(not supplied)
(A) Without
a Converter/Descrambler
Box
With this connection, you can: use your
Combination
VCR remote control to select
channels for viewing and select unscrambled
channels for timer recording.
Scrambled
channels may not be viewed or recorded with
this connection.
Back of Combination
VCR
,%TV
(B) With a Converter/Descrambler
Box
With this connection, you may record and view
any channel including scrambled
channels.
Please note, however that channel selection
must be made at the cable company converter
box. Timer recording is limited to one channel at
a time, and you can only view the channel you
are recording.
(B)
Cable TV Converter
Box
from CATV
(cable)
To Watch
and Record
Scrambled/
Unscrambled
Channels
Set the Combination
VCR channel
selector to the output channel of the
cable converter box (e.g. CH3).
Now, select channels to be viewed or
recorded at the cable converter box.
5
Advertisement
