Special Vcr Features (Vcr Lock, Warning Beeper) - Panasonic Omniversion PV-M2046 Operating Instructions Manual

Special VCR Features
[_'Check list before you begin ....
[] All connections are made (see page 5).
[] Your Combination VCR is plugged in.
VCR Lock Feature
When activated, this feature prohibits all operations except for timer
recording, and tape eject. This is useful to prevent misoperation and
protect your Combination VCR from curious children,
[
STOP/EJECT
STOP/EJECT
Hold down STOP/EJECT on
the Combination VCR for 7
seconds during Stop, or
Power OFF mode.
VCR LOCK ACTIVATED
To Cancel the VCR Lock feature,
STOP/EJECT
Hold down STOP/EJECT on
the Combination VCR for 7
seconds again during Stop,
or Power OFF mode.
VCR LOCK OFF
• VCR Lock mode is cancelled automatically after
24 hours when the clock is set.
• This feature cannot be activated or canceled when
a timer or one touch recording is in progress.
@
Q
-_o •
6c:b ....
i _ L¸
Warning Beeper Feature
When you select BEEPER ON as described below, a short warning will
sound each time an invalid entry or operation is made and a timer
program is set.
:_: Push MENU to
C_ display the menu.
MENU
Rotate and push the
WHEEL to select "VCR".
MAIN MENU
CH CLOCK EXIT
SELECT : ROTATE WHEEL
SET : PUSH WHEEL
Rotate the WHEEL to
select "BEEPER", then
push to select "ON" or
"OFF".
..... SET UP VCR .....
REPEAT PLAY : OFF
I= I
SELECT ROTATE WHEEL
SET PUSH WHEEL
END PUSH MENU KEY
C::)
MENU
Push MENU twice to
exit this screen.
4_