Vcr Setup - LG 32LC2R Series Owner's Manual

I,,_0323B l,_,en 3/'10/06 8:52 PH Page 19 _o
VCR SETUP
To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides
of the screen may remain visible on the screen.
When connecting with an antenna
Connect the ANT OUT socket of the VCR to the
ANTENNA IN socket on the set
Connect the antenna cable to the ANT IN
socket of the VCR.
Press the PLAY button on the VCR and match the
appropriate programme between the TV and VCR
for viewing.
When connecting with a RCA cable
VCR
N
0
Z
Z
m
C_
Z
m
-4
C
"0
Connect the AUDIO/VIDEO jacks between TV and VCR.
Match the jack colors (Video -- yellow, Audio Left _ white,
and Audio Right _ red).
Insert a video tape into the VCR and press PLAY on the
VCR, (Refer to the VCR owner's manual)
VCR
Select AV3 input source using the INPUT button on the
remote control.
- If connected to AV IN 4, select
AV4
input source.
(except 42PC3 RV*)
19