I,,_0323B l,_,en
3/'10/06
8:52
PH
Page
12
INSTALLATION
STAND INSTALLATION
This feature
is not available
for all models.
r-
7
Place the set with the screen facing down on a cushion or soft cloth as shown in Figures ].
Before unfolding the stand,please make sure two locks (A2)on the bottom of the stand push outward.
Pull the stand out as shown above in Figures 2 ~ 3.
After unfolding the s_nd,please insert and tighten the screws in the holes (B)on the bottom of the stand.
When connecting cables to the setDo not disengage the lock (C).
This may cause the set to fail,causing serious bodily injury and serious damage to the set.
12