Nikon D300 User Manual page 116

3
Press the shutter-release
button all the way down to
start the timer. The self-timer
lamp (AF-assist illuminator) will start to blink and a beep will
begin to sound. Two seconds before the photograph is taken,
the self-timer lamp will stop blinking and the beeping will
become more rapid.
Raising the flash interrupts the timer. To restart, wait until the
flash-ready indicator is displayed in the viewfinder and press
the shutter-release button halfway.
To turn the self-timer off before a photograph is taken, turn the
release mode dial to another setting.
9O
[] _,,_,,'_b
In self-timer mode, a shutter speed of _fu I_b is equivalent to
approximately 1/10 s.
[] See Also
For information on changing the timer duration, see Custom Setting c3
([Self-timer delay], pg. 280). For information on setting a beep to sound
during the timer count-down, see Custom Setting dl ([Beep], pg. 281).