Nikon COOLPIX S9100 User Manual page 41

L_4 Notes on Vibration Reduction
• Vibration reduction may take a few seconds to activate after the power is turned on, or the camera
enters shooting mode from playback mode, Wait until the image of the monitor stabilizes before
shooting,
• Due to characteristics of the vibration reduction function, images displayed in the camera's
monitor immediately after shooting may be displayed blurry,
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations,
• When the Night landscape or Night portrait scene modes are set to Tripod, vibration
reduction is turned off,
• When recording HS movies, vibration reduction cannot be used.
• When On (hybrid) is selected, electronic vibration reduction may not be able to correct the
image if vibrations are very small or very large.
• When On (hybrid) is selected, electronic vibration reduction is disabled if shutter speed is fast or
very slow,
• When electronic vibration reduction is operating while On (hybrid) is selected, the shutter is
released twice for each shot and then the image is corrected, therefore more time is needed to
save images, The Shutter sound (_ 183) is heard only once. One image is saved,
g
g
c
179