Connecting The Camera To A Printer; Turn Off The Camera - Nikon COOLPIX S9100 User Manual

Connecting the Camera to a Printer
1 Turn off the camera.
2 Turn on the printer.
-q
6"
o_
3
P_
O-
P_
Check printer settings.
3 Connect the camera to the printer using the supplied USBcable.
Be sure that connectors are properly oriented. Do not attempt to insert connectors at an
angle, and do not use force when connecting or disconnecting the USB cable.
164
4
The camera is automatically turned on. _F]_:_I
When properly connected, the PictBridge startup screen _ II
((1_,:'). will be displayed in the camera monitor, followed by ,:_L_,_L' _ _' <_' _u'l__' i_ ,
......
the Pr nt se ect on screen (_))
_1_ lithe PictBridge Startup Screen Is Not Displayed
Turn the camera off and disconnect the USBcable. Set the Charge by computer option (_ 187)
in the camera's setup menu to Off and reconnect the cable.