Advertisement
6. Followstepsbelowto assemblethe grasscatcher:
a. Placebag overframe sothat its black plasticside
is at the bottom.
b. Slip plasticchannelof grass bagoverhooks on
the frame.See Figure3-6. All the plasticchannels
exceptcentertop of bag attachfrom outsideof
bag.
c. Attachcentertop of bag from insideof bag.
7. Followstepsbelowto attachgrass catcher:
a. Lift rear dischargedoor.
b. Placegrass catcheron thepivot rod. Letgo
of dischargedoor sothat it restson thegrass
catcher.See Figure3-7.
To removegrass catcheror convertto a mulcher(if
equipped),lift rear dischargedoor on the moweras
shown in Figure3-7.Liftgrass catcherup and out of the
pivot rod. Releasereardischargedoor to allowit to close
rearopeningof mower.
_
WARNING:Never operate mower
unless the hookson the grass catcher
are firmly seatedin the slots on the
handlebracketassemblies, and the rear
dischargedoor rests firmly against top
of the grass catcher.
.
ifcovertingto side discharge,make suregrass
catcheris off unitand reardischargedoor is closed.
a. Lift mulchingplugon the rightsideof mower.
b. Slide two hooks of sidedischargechute under
the hinge pin on the mulchingplug assemblyand
lowerthe side mulchingplug.See Figure3-8.
i i
J /
Figure 3-5
NOTE: Donot removethe side mulchingplug at anytime,
evenwhenyou are not mulching.
Figure 3=6
J
setup and
ustment
CUTTING HEIGHT
A!l Wheelsmust be
placed in the same
relative position.
GRASSCATCHER
!in bag is
turned right side Out
beforeassembling
_el w ill be
f
\
_,
,J
Figure 3=8
Figure 3-7
7
he grass catcher.
Advertisement
