Operation - MTD 11A-414G200 Operator's Manual

Push mower
Table of Contents

Advertisement

Operation
Starting Engine
i_
WARNING:
Be sure no one other than the operator
is standing near the lawn mower while starting
engine or operating mower. Never run engine
indoors or in enclosed, poorly ventilated areas.
Engine exhaust contains carbon monoxide, an
odorless and deadly gas. Keep hands, feet, hair and
loose clothing away from any moving parts on
engine and lawn mower.
Follow the set of instructions pertaining to your unit. Refer to
engine manual for help with the engine.
Briggs & Stratt0n Engine
I.
When starting
the engine for the first time, push primer (if
equipped)
five times. For all future
starts, push the primer
three times. Wait about
two seconds between
each push.
See Fig. 5-I. Do not prime to restart a warm engine.
2.
Standing
behind
the mower, squeeze the blade control
against
upper handle.
3.
Holding
these two handles together
firmly, grasp recoil
starter handle and pull rope out with a rapid, continuous,
full arm stroke. See Figure 5-I. Keeping a firm grip on the
starter handle, let the rope rewind
slowly. Repeat until
engine cranks. Let the rope rewind
each time slowly.
Honda Engine:
I.
Place the fuel valve lever (if equipped)
found
on the left
side of the engine into the ON (OPEN) position.
See Fig. 5-2.
2.
Move the choke lever (if equipped)
all the way backward
into the choke position.
3.
Standing
behind
the mower, squeeze the blade control
against
upper handle. The choke will now begin to slowly
return to the off choke position
after activating
the blade
control. Therefore,
quickly
move onto step four below.
4.
Holding
these two handles together
firmly, grasp recoil
starter handle and pull rope out with a rapid, continuous,
full arm stroke. See Fig. 5-2. Keeping a firm grip on the
starter handle let the rope rewind
slowly. Repeat until
engine cranks. Let the rope rewind
each time slowly.
Stopping Engine
1.
Release blade control
to stop the engine and blade.
WARNING:
Wait for the blade to stop completely
before performing
any work on the mower or to
remove the grass catcher.
f
Figure 5-1
Figure 5-2
J
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

11a-414c000410 series

Table of Contents