Removing a PCI Express Graphics Card From a Multi Graphics Card Configuration
Installing Graphics Cards for Multi Graphics Card
Replacing the PCI and PCI Express Cards
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
If a graphics card is installed in each of the PCIe x16 card slots in the multi-graphics configuration, the PCIe x1 and one PCI card slot are not
accessible for use.
1
PCI card
3
PCIe x1 card slot
5
PCIe x16 card
Removing a PCI Express Graphics Card From a Multi Graphics Card Configuration
NOTE:
This section deals with dual and triple configurations of PCIe x16 graphics cards only. For removal of any other type of PCI or PCIe cards, see
Replacing the PCI and PCI Express
1. Follow the procedures in
Before You
2. Remove the computer cover (see
3. Gently securing both graphics cards with one hand, remove the graphics card bridge (if present) with your other hand by pulling it up and away from the
computer. Set it aside.
Repeat if removing two bridges from a triple card configuration.