Removing Pci And Pci Express Cards; Replacing Pci And Pci Express Cards - Dell Inspiron 560s Service Manual

Service manual
Hide thumbs Also See for Inspiron 560s:
Table of Contents

Advertisement

Back to Contents Page
  PCI and PCI Express Cards
Dell™ Inspiron™ 560s Service Manual 
  Removing PCI and PCI Express Cards
  Replacing PCI and PCI Express Cards
  Configuring Your Computer After Removing or Installing a PCI or PCI Express Card
 
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
 
WARNING:
To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
 
WARNING:
Do not operate your equipment with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)
removed.
 
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 
is not covered by your warranty.
 Removing PCI and PCI Express Cards
 
1. Follow the procedures in
Before You
 
2. Remove the computer cover (see
 
3. Remove the support bracket (see
 
4. If necessary, disconnect any cables connected to the card and remove the card.
 For a PCI or PCI Express x1 card, grasp the card by its top corners, and ease it out of its connector.
l
 For a PCI Express x16 card, press down on the retention mechanism, grasp the card by its top corners, and then ease it out of its connector.
l
1 PCI Express x16 card 2 PCI Express x16 card slot
3 securing tab
4 retention mechanism
 
5. If you are removing the card permanently, install a filler bracket in the empty card-slot opening.
NOTE:
Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep
dust and dirt out of your computer.
 
6. Replace the support bracket (see
 
7. Replace the computer cover (see
 
8. Connect the computer and devices to electrical outlets, and then turn them on.
 
9. Remove the card's driver from the operating system.
 
10. To complete the removal procedure, see
 Replacing PCI and PCI Express Cards
 
Begin.
Removing the Computer
Cover).
Removing the Support
Bracket).
Replacing the Support
Bracket).
Replacing the Computer
Cover).
Configuring Your Computer After Removing or Installing a PCI or PCI Express
Card.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents