Non-operating
Humidity
Operating
Non-operating
Altitude
Operating
Non-operating
Thermal dissipation
Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in
use. This is referred to as Power Save Mode*. If the computer detects input from the keyboard, mouse, or other input devices, the monitor automatically
resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature:
U2412M
VESA Modes
Horizontal Sync Vertical Sync Video
Normal
Active
operation
Active-off mode Inactive
Switch off
-
The OSD will only function in the normal operation mode. When any button is pressed in Active-off mode, one of the following messages will be displayed:
Activate the computer and the monitor to gain access to the OSD.
NOTE:
This monitor is ENERGY STAR
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
** Maximum power consumption with max luminance, Dell Soundbar, and USB active.
Pin Assignments
VGA Connector
Pin
15-pin Side of the Connected Signal Cable
Number
1
Video-Red
2
Video-Green
Storage: -20 °C to 60 °C (-4 °F to 140 °F)
Shipping: -20 °C to 60 °C (-4 °F to 140 °F)
10% to 80% (non-condensing)
Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90% (non-condensing)
3,048 m (10,000 ft) max
10,668 m (35,000 ft) max
245.66 BTU/hour (maximum)
129.66 BTU/hour (typical)
Power Indicator
Active
Active
Blue
Inactive
Blanked
Amber
-
-
Off
®
-compliant.
Power Consumption
72 W (maximum) **
29 W (typical)
Less than 0.5 W
Less than 0.5 W