Operation; Starting Engine; Stopping Engine - MTD 11A-02MG000 Operator's Manual

Operation
Starting Engine
2_
3.
WARNING: Be sure no one other than the operator
is standing near the lawn mower while starting
engine or operating mower. Never run engine
indoors or in enclosed, poorly ventilated areas.
Engine exhaust contains carbon monoxide, an
odorless and deadly gas. Keep hands, feet, hair and
loose clothing away from any moving parts on
engine and lawn mower.
Push primer 1-3 times. Wait about two seconds between
each push. See Fig. 5-1. In temperature around 50°F or
below, prime 3-5 times. After the engine is warmed up, one
prime may be needed for all temperatures.
Standing behind the mower, squeeze the blade control
against upper handle.
Holding these two handles together firmly, grasp recoil
starter handle and pull rope 1-3times. See Fig. 5-1. Keeping
a firm grip on the starter handle, let the rope rewind each
time slowly. If engine does not start, it may be necessary to
re-prime the engine.
Stopping Engine
1. Release blade control to stop the engine and blade.
WARNING: Wait for the blade to stop completely
before performing any work on the mower or to
remove the mulching baffle (if equipped).
UsingYourLawn Mower
Be sure lawn is clear of stones, sticks, wire, or other objects
which could damage lawn mower or engine. Such objects could
be accidently thrown by the mower in any direction and cause
serious personal injury to the operator and others.
f
Figure 5-1
WARNING: The operation of any lawn mower can
result in foreign objects being thrown into the eyes,
which can damage your eyes severely. Always wear
safety glasses while operating the mower, or while
performing any adjustments or repairs on it.
WARNING: If you strike a foreign object, stop the
engine. Remove wire from the spark plug,
thoroughly inspect mower for any damage, and
repair damage before restarting and operating.
Extensive vibration of mower during operation is an
indication of damage. The unit should be promptly
inspected and repaired.